Router Table Techniques for Making Moldings

Router Table Techniques for Making Moldings

the No Comments

Router is a versatile tool especially when it is mounted on a table. You will be able to accomplish a number of woodworking projects with it as you can make different cuts, moldings, edges and others with it. Here, we are going to show you how you can make moldings with a router table. For this project, you will require only your workpiece, a router and its table.

FirstĀ  start by assembling your router table and fitting into it all the necessary components it should have. Make sure that feather boards are clamped on the fence and table. You will require it together with a push stick for the protection of your fingers against the spinning bit. Maintain a steady rate when feeding the board through the router. You need the fence, however, it does not have to be at square with the table. Fix the bit tightly and properly into the router which will be positioned on the base. Some bits come with bearing guides. If you are using such a bit, you need to ensure that it is properly mounted. In this regard, you will have to use a straightedge which you will place against the fence to enable you arrange the bearing guide. The space between the straightedge and the bearing guide should be a paper-thin space. Position the workpiece against the bit using the feather boards clamped on the fence and table. With this arrangement, you will be able to focus on feeding the board.

The router bit can give some burning marks to the board. When feeding the board, you should not stop but instead, feed at a steady rate. In this way, you will prevent the router bit from causing burn marks on the board. However, it is the nature of your workpiece and the bit you are using that will determine the rate at which you will feed the board. As you are advancing in woodwork, you will be able to decide on the best rate by the amount of resistance you feel when you push against the board and just by hearing the sound of the router as the bit spins.

Don’t overwork the motor of the router or mount too much pressure on the bit by cutting a large portion at a time. Any cut above 3/8 inch deep is not good for the router and will eventually give poor quality cuts with rough surface. So, it is advisable that you set the fence so that only 2/3 of the wood can be removed at the same time with the first pass of the bit. After this initial pass, make the final pass feeding the workpiece at faster rate this time around. But you have to adjust the fence before feeding the wood for this second time.

It is also advisable that you take some safety measures before making your own moldings with your router and its table. Put on safety glasses, hearing protection devices, face cover and proper clothing. Before you change the bit, ensure that you unplug the router from its power source. Feed the board in the proper direction, that is moving from right to left against the fence.

Types of Router Tables

the No Comments

Router table is a good addition to your power tool collection if you are a woodworker given its versatility. Do-it-yourself hobbyists can also make use of routers and router tables. Normally, routers are handheld but there are some designs that can be mounted on tables. When it is mounted on a table, it will become more versatile. The router tables themselves are available in three different types. Each type is designed to meet a particular need. So, before you purchase your router table, it is advisable that you first take time to study the available types, know their features, the purpose they are meant to serve and read best router table reviews 2017. This will help you to make an informed decisions. With the right router table, your work will become easier and you will be able to make a more accurate cuts. Here are the three types of router table and what you should know about it.

Benchtop router table

Benchtop router table is among the most popular types of router table owing to the fact that different kinds of routers can be mounted on it. Besides, it has impressive versatility. Benchtop is long and sturdy. The top of the table which looks like that of a bench is roomy and thus provides enough space for the work material. It is a good option for woodworkers working on lengthy materials. There are a number of hardware to be fitted on it to make it more functional. The mounting hardware fitted on it are two out feed shims, aluminum router mounting plate, adjustable MDF face plates and aluminum fence. It can be used to route curved wood pieces if guard and starter pin are fitted to it. Other accessories that can be fitted to a benchtop router table to make it more functional are dust collection and cord wrap.

Floor standing router table

Floor standing router table is another type of table that you can mount your router on. As the name suggests, the table features legs for standing it on the floor and then a top. Floor standing router table is a space saver as it does not occupy much space. Besides, it comes with a storage space beneath it where you can keep some of your items such as your router bits. It is best suited for inverted table routing. There are a number of accessories that can be fitted on it which include feather boards, dust outlet, lead in a pin for curved wooden pieces, mitre guide and others.

Extension router table

Extension router table also known as extendable router table is a unique type of router table as its dimension can be adjusted to suit the need of the user. Both sides of the router table is extendable with a deep top and a standard fence. Wood frame, router fence, high split fence, split fence, T-slot and aluminum T-track as well as durable safety guard and measuring tapes are made available. It is an option for people that lack space in their workshop as you can adjust the dimension to suit the available space in your home. It normally comes with a top that features MDF core, polyethylene edges and melamine surfaces.